Flex Pivot Shower Enclosure with Return Panel

Print
  • New

  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 42.17ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;

What is the clearance measurement for the door to swing open into the room for the 32x32 model? We have a small bathroom and I want to make sure the glass shower door doesn't open into a wall or toilet (dependent on installation.)

Asked by: tluvnv
Thank you for reaching out to DreamLine. The glass panel will swing appx. 19" from the pivot point into your bathroom. Please be sure to measure from the point on the threshold that you will be installing the kit. If you have any other questions, please contact a DreamLine PreSales Consultant at 866.282.8413. We are available 9am-6pm EST, M-F and will be happy to answer any questions you may have. You may also send an email to support@dreamline.com or use our “Chat with Expert” feature on DreamLine.com. Thank you for considering DreamLine!
Answered by: DreamLine Support 1
Date published: 2019-02-12

hello, our dreamline flex corner shower stall is on its way to our local home depot. There aren't any installers within 100 miles of our location. please send a video on how to install this particular shower kit.

Asked by: Lisa R
Thank you for reaching out to DreamLine. Unfortunately, we do not have installation videos available at this time. Most general contractors with bathroom remodeling experience are more than capable of installing the Flex shower enclosure. If you have any other questions, please contact the DreamLine Customer Support Team at 866.731.2244. We are available 8am-7pm EST, Monday through Friday, and Saturdays from 9am to 5pm EST and will be happy to answer any questions you may have. You may also send an email to support@dreamline.com. Thank you for considering DreamLine!
Answered by: DreamLine Support 1
Date published: 2018-02-19

THIS ITEM HAVE CENTER DRAIN?

Asked by: NICK2900
Thank you for reaching out to DreamLine. The base that is included with this Flex shower enclosure kit is a corner drain location. The photo is incorrect, and we are working to have that corrected. Please refer to the technical drawing link at the bottom of the page for the actual drain location for the shower base. If you have any other questions, please contact the DreamLine Customer Support Team at 866.731.2244. We are available 8am-7pm EST, Monday through Friday, and Saturdays from 9am to 5pm EST and will be happy to answer any questions you may have. You may also send an email to support@dreamline.com. Thank you for considering DreamLine!
Answered by: DreamLine Support 1
Date published: 2017-11-24

Can the door panel and side panel location be switched? Can the door swing be reversed?

Asked by: Hugh
Unfortunately, the door swing can not be reversed for the Flex Shower Enclosure.
Answered by: DreamLine Support
Date published: 2017-11-03

Why do the dimensions say "28-7/16 to 32-7/16"? What does it depend on? And if this is the same as DL-6714-22-01CL, but without the base, then why are the dimensions different?

Asked by: Joe G
Great questions! The variance in width is on the moving door side. This side is able to be adjusted to fit an opening 28-7/16 to 32-7/16". It depends on how far you extend out the expandable frame structure. The DL-6714-22-01CL gives you the dimension of the largest component, which in this case would be the shower base that is 32" by 32". The exact same enclosure will fit on the 32" shower base. Hope this explains it a little better. If you have any other questions or would like to discuss this further, please contact the DreamLine Customer Support Team at 866.731.2244. We are available 8am-7pm EST, Monday through Friday, and Saturdays from 9am to 5pm EST and will be happy to answer any questions you may have. You may also send an email to support@dreamline.com. Thank you for considering DreamLine!
Answered by: DreamLine Support
Date published: 2017-07-19

which way on the water stripping does the flap go?Does it go inside of shower or on the outside of shower?Flap does not clear bottom shower rail when facing inside of shower

Asked by: shortstuff
The flange on the bottom strip of the Flex shower door should be on the inside of your shower to deflect water back into the shower. Hope this helps. If you have any other questions, please contact the DreamLine Customer Support Team at 866.731.2244. We are available 8am-7pm EST, Monday through Friday, and Saturdays from 9am to 5pm EST and will be happy to answer any questions you may have. You may also send an email to support@dreamline.com. Thank you for considering DreamLine!
Answered by: DreamLine Support
Date published: 2018-01-12

What type of caulk do I use to attach the walls? I don't want to use something not approved?

Asked by: Mrl60
Thank you for reaching out to DreamLine! DreamLine recommends that Liquid Nails for Tub Surrounds be used to adhere the panels to your finished wall or backer board. We also recommend troweling it out for an even application on the back of the panel. Hope this helps. Any other questions? Please call the DreamLine Customer Support Line at 866-731-2244. Prefer email? Send an email to support@dreamline.com. We are available from 8am-7pm EST, M-F and Saturday from 9am-5pm EST to answer any questions you may have. Thank you for considering DreamLine!
Answered by: DreamLine Support
Date published: 2017-02-17
  • y_2019, m_6, d_18, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_SHDR-2230300-RT, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_bathauthority
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 42.89ms
  • QUESTIONS, PRODUCT

Send to a Friend

Flex Pivot Shower Enclosure with Return Panel

Flex Pivot Shower Enclosure with Return Panel

Track Your PO